Placeholder image


Dr. VEERESH KUMAR G B

ABOUT
NAME: Dr. VEERESH KUMAR G B

M.TECH: VTU, Belagavi

E- MAIL: veereshkumargb@nitandhra.ac.in

POSITION: Assistant Professor

PhD: NIT, Warangal

PHONE: +91 


AREAS OF INTEREST: Material Science and Metallurgy, Composite Materials, Manufacturing Technology, Artificial Neural Networks

EXTERNAL LINK: https://scholar.google.com/citations?user=5lSrmlQAAAAJ&hl=en
BRIEF

 Work Experience

  • Associate Professor, Amrita School of Engineering, AVV University, Bangalore    Duration: 01-August-2013 to 10-October 2018.
  • Assistant Professor (Selection Grade), Amrita School of Engineering, AVV University, Bangalore. Duration: 01-May-2012 to 31-07-2013.
  • Assistant Professor (Senior Grade) Amrita School of Engineering, AVV University, Bangalore. Duration: 03-Feb-2011 to 30-April-2012.
  • Assistant Professor, SBM Jain College of Engineering, Jain University, Ramanagaram. Duration: 15-Sept-2009 to 02-Feb-2011.
  • Senior Lecturer from 1-Mar-2007 to 14-Sept-2009, and Lecturer, from 02-Aug-2004 to 28-Feb-2007 and Don Bosco Institute of Technology, Bangalore.

 Patents Published

  •  An Indian patent published  titles as SINGLE FUEL FILTER MEDIA TO MEET PARTICLE AND WATER SEPARATION EFFICIENCY” with a Reference No. 202141008380-A, Application No. TEMP/E-1/9156/2021-CHE. Filing Date-27/02/2021; The Patent Office Journal No. 10/2021 Dated 05/03/2021 Page No. 11236.

  • An Indian patent published titled as INTELLIGENT TRAFFIC CONTROLLER” with a Reference No. 201941038152-A, Application No. TEMP/E-1/40451/2019-CHE, Filing Date: 21/09/2019; The Patent Office Journal No. 13/2021 Dated 26/03/2021 Page No. 16113.

  • An Indian patent published titles as Twin Suction Tube in Diesel Fuel Filters” with a Reference No. 202141014555, Application No. TEMP/E-1/16427/2021-CHE, Filing Date-30/03/2021 - The Patent Office Journal No. 15/2021 Dated 09/04/2021 Page No. 18228.

  • An Indian patent published titles as Low-Cost Automatic Water in Fuel Sensor for Water Draining System in Diesel Fuel Filters” with a Reference No. 202141014587, Application No. TEMP/E-1/16431/2021-CHE, Filing Date-30/03/2021 - The Patent Office Journal No. 15/2021 Dated 09/04/2021 Page No. 18229.

 PhD Guided: 

Mr. Ulhas K. Annigeri Thesis titled as "Fabrication and Investigations on Physical, Mechanical, Tribological Characteristics of Al6061-B4C and Al6061-Si3N4 Metal Matrix Composites", at Amrita Vishwa Vidyapeetham University, Bangalore Campus, Bangalore.

Currently 10 Students are Pursuing  PhD

  • Publications

  • Publications in International Journals:

    • G B Veeresh Kumar, P S Shivakumar Gouda, Pramod R, Hari Kiran Reddy R, Ramu P, Kunaal Kumar BPhysical, Mechanical and Tribological Investigations on Al6061 and Titanium Carbide Reinforced Metal Matrix Composites”, Submitted to Composites Science and Technology, Elsevier's Journal (CSTE-S-20-00826) Under Review.
    • Pagidi Madhukar, N Selvaraj, G B Veeresh Kumar, C S P Rao, “Effect of B4C Nanoparticles on Mechanical and Microstructure Properties of AA7150-B4C Nanocomposites Fabricated by Ultrasonic Assisted Double Stir Casting Process”, Submitted to Journal of Composites – Part B (JCOMB_2019_4539). Under Review.
    • P Madhukar, N Selvaraj, CSP Rao, G B Veeresh Kumar, “Microstructure and Mechanical Behavior of AA7150-TiCnp Nanocomposites Fabricated by Advanced Novel Fabrication Process of Ultrasonic Assisted Stir Casting”, Submitted to Submitted to Nature Journal - Scientific Report - (Ref No. SREP-19-32671) Under Review.
    • Veeresh Kumar G B, N D Prasanna, Balasubramanya H S, S M Aradya, “Studies on mechanical and wear properties of Al6061 reinforced with SiC-Gr HMMCS”, Journal of Materials Processing Technology, Under Review.
    • R Pramod, S Basavarajappa, Veeresh Kumar G B, “Drilling Induced Delamination Assessment of Nano Particles Reinforced Polymer Matrix Composites”, Communicated.
    • Umarfarooq M A, P S Shivakumar Gouda, G B Veeresh Kumar, Krishnaraja G Kodancha, "An Assessment on Residual Stress Measurement in FRP Composites using Relaxation techniques" in Iranian Journal of Materials Science and Engineering: Accepted and Ready to be Published.
    • Pagidi Madhukar, N.Selvaraj, G.B.Veeresh Kumar, C.S.P.Rao, Faruq Mohammad, Murthy Chavali, “Effect of TiCnp on microstructure and mechanical behaviour of high-performance Al7150-TiC nanocomposites”, Materials Science and Engineering: B, Volume 265, March 2021, 115034. https://doi.org/10.1016/j.mseb.2020.115034
    • G B Veeresh Kumar, Pramod R, Gude Venkatesh Chowdary, Mandadi Surya Vamsi, K Jayarami Reddy, Madeva Nagaral, K Naresh, “Effects of addition of Titanium Diboride and Graphite Particulate Reinforcements on physical, mechanical and tribological properties of Al6061 Alloy based Hybrid Metal Matrix Composites”, Journal of Advances in Materials and Processing Technologies, Taylor and Francis journal. https://doi.org/10.1080/2374068X.2021.1904370.
    • G B Veeresh Kumar, P S Shivakumar Gouda, Pramod R,U Srinivas Kumar Chowdary, Tammila Subash, Mandadi Surya Vamsi, K Naresh, Development and Experimental Evaluation of Titanium Diboride Particulate Reinforcements on the Al6061 Alloy Composites Properties Advances in Materials and Processing Technologies” Journal of Advances in Materials and Processing Technologies, Taylor and Francis journals, DOI: 10.1080/2374068X.2020.1855399. https://www.tandfonline.com/toc/tmpt20/current
    • G. B. Veeresh Kumar, A. Ulhas Krishna Rao, and T. Srinivas Rao, “Fabrication and Investigation of Mechanical and Dry Sliding Wear Characteristics of Al6061-Si3N4 Composites,” Materials Performance and Characterization 9, no. 1 (2020): 591–604. https://doi.org/10.1520/MPC20200037.
    • Pagidi Madhukar, N Selvaraj, G B Veeresh Kumar, C S P Rao “Enhanced Performance of AA7150-SiC Nanocomposites Synthesized by Novel Fabrication Process”, Elsevier Publications Ceramics International 46 (2020) 17103–17111. https://doi.org/10.1016/j.ceramint.2020.04.007
    • G. B. Veeresh Kumar, D. Gopinath Reddy, C. Vineeth Reddy, Ch Sriteja, R. Pramod, "Investigation of Mechanical and Tribological Properties of Al6061–TiB2 Metal Matrix Composites", Materials Performance and Characterization, January 2020, ASTM International. DOI: 10.1520/mpc20190173G.
    • Veeresh Kumar G B, Ulhas K Annigeri, T Srinivas Rao, "Manufacturing Feasibility of Al6061and Boron Carbide Particulate Reinforcement to Cast a Metal Matrix Composite with Wettability Agent", International Journal of Innovative Technology and Exploring Engineering (IJITEE), ISSN: 2278-3075, Volume-9 Issue-2, December 2019.
    • M.Balaji, Hiregoudar yerrennagoudar, G.B.Veeresh Kumar, “Effect of Extrusion Ratio & Extrusion Temperature on Mechanical Properties of Hot Extruded Hybrid Composites of Al6061/Sic/Graphite”,International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-8 Issue-11, September 2019,SCOPUS link - https://www.scopus.com/authid/detail.uri?authorId=57210201901
    • Balaji, M., Yerrennagoudar, H., Veeresh Kumar G.B.,“ Thermal conductivity & thermal expansion behaviour of hot extruded hybrid composites of Al6061/Sic/GR”, International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-4, November 2019,SCOPUS link -https://www.scopus.com/authid/detail.uri?authorId=57210201901
    • Pagidi Madhukar, N Selvaraj, G B Veeresh Kumar, C S P Rao, “Microstructure Studies of AA7150-hBN Nanocomposites Fabricated by Ultrasonic Assisted Stir Casting”, Materials Research Express 6 (2019) 116545. https://doi.org/10.1088/2053-1591/ab48ad.
    • P Madhukar, N Selvaraj, CSP Rao, G B Veeresh Kumar, “Fabrication and Characterization Two Step Stir Casting with Ultrasonic Assisted Novel AA7150-hBN Nanocomposites” Elsevier Publications Journal of Alloys and Compounds 815 (2020) 152464.
    •  Umarfarooq MA, P S Shivakumar Gouda, Abhilash E, NR Banapurmath, Veeresh Kumar GB, “Impact of Process Induced Residual Stresses on Interlaminar Fracture Toughness in Carbon Epoxy Composites”, Elsevier Journal Composites Part A 127 (2019) 105652. SCI Journal with Impact Factor of 6.282.
    •  G B Veeresh Kumar and Pramod R, Ch Guna Sekhar, G Pradeep Kumar, T Bhanumurthy,“Investigation of Physical, Mechanical and Tribological Properties of Al6061-ZrO2 Nano-Composites”, Heliyon Journal Elsevier, Volume 5, Issue 11, November 2019, e02858, https://doi.org/10.1016/j.heliyon.2019.e02858.
    • G B Veeresh Kumar, R Mageshvar, Rejath R, S Karthik, R Pramod, C.S.P Rao “Characterization of Glass Fibre-Bituminous Coal Tar Reinforced Composites for High Performance Applications” Journal of Composites: Part-B Engineering, Volume 175, 15 October 2019, 107156. SCI Journal with Impact Factor of 6.84.
    • G B Veeresh Kumar, Pinaki Prasad Panigrahy, Nithika Suresh, Pramod R, C S P Rao, “Assessment of Mechanical and Tribological Characteristics of Silicon Nitride Reinforced Aluminum Metal Matrix Composites”, Journal of Composites: Part-B Engineering, Volume 175, 15 October 2019, 107138. SCI Journal with Impact Factor of 6.84.
    • P Madhukar, N Selvaraj, CSP Rao, Veeresh Kumar G B “Tribological Behaviour of Ultrasonic Assisted Double Stir Casted Novel Nano-Composite Material (AA7150-hBN) using Taguchi Technique”, Journal of Composites: Part-B Engineering, Volume 175, 15 October 2019, 107136. SCI Journal with Impact Factor of 6.84.
    • Ulhas K Annigeri, G B Veeresh Kumar, “Physical, Mechanical and Tribological Properties of Al6061- B4C Composites”, ASTM International - Journal of Testing and Evaluation. https://doi.org/10.1520/JTE20180138. Impact Factor of 0.73.
    • G B Veeresh Kumar, P S Shivakumar Gouda, R Pramod, C S P Rao, “Effect of Tungsten Carbide Reinforcement on the Aluminum 6061 Alloy”, ASTM International - Journal of Testing and Evaluation. https://doi.org/10.1520/JTE20170545. Impact Factor of 0.73.
    • P S Shivakumar Gouda, Chatterajji Vijay, B Siddaramiah, G B Veeresh Kumar, "Fracture Toughness of Glass Epoxy Laminates using Carbon Nano Particles and ETBN Rubber" Vol No. 6, No.1, 20017; ASTM International - Materials Performance and Characterization Journal. doi:10.1520/MPC2017/vol.6/No.1/2017.
    • G B Veeresh Kumar, P S Shivakumar Gouda, R Pramod, C S P Rao, “Synthesis and Characterization of TiO2 Reinforced Al6061 Composites”, Journal of Advanced Composites Letters, Vol. 26, Iss.1, 2017, Page No. 168-173. Impact Factor of 0.4.
    • G.B. Veeresh Kumar, R. Pramod, "Influence of WC Particulate Reinforcement on the Mechanical Properties and Sliding Wear of Al6061 Alloys", Applied Mechanics and Materials, Vols. 813-814, pp. 67-73, Nov. 2015.
    • G.B. Veeresh Kumar, R Pramod, “Artificial Neural Networks for Predicting the Tribological Behavior of Al7075-SiC Metal Matrix Composites”, International Journal of Material Science & Engineering, Volume 1 issue 3, 2014, Pages 06-11. 
    • G.B. Veeresh Kumar, C.S.P. Rao, N Selvaraj, “Studies on mechanical and dry sliding wear of A16061-SiC Composites”, Journal of Composites: Part-B Engineering (Elsevier Publications), volume 43, Issue 3, April 2012, Pages 1185-1191. This journal is indexed in Scopus and has a 5-year Impact Factor of 2.221.
    • G.B. Veeresh Kumar, C.S.P. Rao, N Selvaraj, “Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles”, Journal of Composite Materials (SAGE Publications), Volume 46 Issue 10, May 2012, Pages 1201-1209. This journal is indexed in Scopus and has an Impact Factor of 0.986.
    • G.B. Veeresh Kumar, A.R.K. Swamy, A. Ramesha, “Studies on Properties of As-Cast Al6061-WC-Gr Hybrid MMCs”, Journal of Composite Materials (SAGE Publications), Volume 46 Issue 17, August 2012, Pages 2111-2122.This journal is indexed in Scopus and has an Impact Factor of 0.986.
    • A. R. K. Swamy, A. Ramesha, G.B. Veeresh Kumar, J. N. Prakash, “Effect of Particulate Reinforcements on the Mechanical Properties of Al6061-WC and Al6061-Gr MMCs, Journal of Minerals & Materials Characterization & Engineering, USA, Vol. 10, No.12, pp.1141-1152, 2011.
    • G.B. Veeresh Kumar, C.S.P. Rao, N Selvaraj, “Synthesis and Property Evaluation of Al7075-Al2O3 Composites”, CiiT International Journal of Biometrics and Bioinformatics, April 2011. This journal has an impact factor of 0.316.
    • G.B. Veeresh Kumar, C.S.P. Rao, N Selvaraj, “Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review, Journal of Minerals & Materials Characterization & Engineering, USA, Volume 10, no.1, pp.59-91, 2010.
    • A.R.K. Swamy, A. Ramesha, J.N. Prakash, G.B. Veeresh Kumar, “Mechanical and tribological properties of as-cast Al6061-tungsten carbide metal matrix composites” An International Research Journal of Material Sciences (Material Science Research India) volume 07, no-2, pp. 355-368, 2010
    • Veeresh Kumar G.B, C.S.P. Rao, Bhagyashekar M.S, Selvaraj N, “Effect of SiC Reinforcement in Al6061 Alloy”, International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences (IJ-ETA-ETS) Volume 3, Issue 1, pp.140-147, Jan 2010 - June 2010.
    • Veeresh Kumar G.B., C.S.P. Rao, Bhagyashekar M.S, Selvaraj N, “Prediction of Wear of Al6061-SiC Metal Matrix Composites using ANN”, International Journal of Computer Applications in Engineering, Technology and Sciences (IJ-CA-ETS) Volume 2, Issue 1, pp. 498-505, October 2009 – March 2010.
    •  G.B Veeresh Kumar, C.S.P. Rao, Bhagyashekar M.S, Selvaraj N, “Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites”, Journal of Minerals & Materials Characterization & Engineering, (JMMCE), USA, Volume 9, no.1, pp.47-59, 2009.
    •  G.R.C. Pradeep, A. Ramesh, G.B. Veeresh Kumar, “Effect of Al2O3 Particulate Reinforcement in Al6061 Alloy”, An International Research Journal of Material Sciences, volume-06, no-2, pp. 453-458, December 2009.                  

     

  • Publications in National Journals:

    1.      G.B. Veeresh Kumar, C.S.P. Rao, Bhagyashekar M.S, Selvaraj N, “Mechanical and Tribological Behavior of Al7075-Al2O3 Composites”, Journal of Mfg Engg, Vol–4, Issue – 2, 2009.
    2.      R.G. Deshpande, H. N. Prashanth and Veeresh Kumar G.B., “Analysis of Cold-Hole Expansion by Split Mandrel as a Useful Technique in Aerospace Industries”, Journal of Manufacturing Engineering, Volume–2, Issue – 3, Sept – 2007.

     

  • SCOPUS Indexed International Publications:

    • A Praneeth, K V S Pramod Kumar, R Pramod, G B Veeresh Kumar, “Investigation of Mechanical properties of Glass Fibre Reinforced Honeycomb Panels” 3rd IConAmma 2018, Amrita School of Engineering, Bangalore Karnataka, India between 16th -18th August 2018.
    • Anant Joshi, P S Shivakumar Gouda, Santosh Savanur, Vinayak Uppin, Veeresh Kumar G B, “Influence of Kenaf on Mechanical Properties of Glass Epoxy Composites”,3rd IConAmma 2018, Amrita School of Engineering, Bangalore Karnataka, India between 16th -18th August 2018.
    • V Anirudh, M Vigneshwaran, E Vijay, R Pramod, G B Veeresh Kumar, “Influence of Titanium Diboride and Graphite Reinforcement on Al6061 Alloy”,Elsevier’s Materials Today: Proceedings, 5 (2018) 25341–25349. Scopus Indexed.
    • Anant Joshi, Santosh Savnur, Vinayak S Uppin, P S Shiva Kumar Gouda, I Sridhar, Veeresh Kumar G B, “Viscoelastic Behavior of Cellulose Coated Glass/Kevlar Epoxy Composite Laminates using Dynamic Mechanical Analyzer”,Elsevier’s Materials Today: Proceedings, 5 (2018) 25486–25493. Scopus Indexed.
    • Umesh Gumgol, Deepak Huddar, Amith Gouda, Jyoti V Vastrad, Veeresh Kumar G B and P S Shivakumar Gouda, “Interlaminar stresses in L Bend geometry using Glass-Cellulose Epoxy Hybrid Composites”, Elsevier’s Materials Today: Proceedings, 5 (2018) 24984–24996. Scopus Indexed.
    • Sateesh Kumar Kanakannavar, Santosh Savanur, Dr. I Sridhar, Dr. P S Shivakumar Gouda, Veeresh Kumar G B, Improved Delamination Behaviour in Glass-Cotton Reinforced Hybrid Composites”,Elsevier’s Materials Today: Proceedings, 5 (2018) 24984–24996.Scopus Indexed.
    • Ulhas K Annigeri, G.B. Veeresh Kumar, “Effect of Reinforcement on Density, Hardness and Wear Behavior of Aluminum Metal Matrix Composites: A Review”, Elsevier’s Materials Today: Proceedings, Volume 5, Issue 5, Part 2, 2018, Pages 11233-11237.
    • G B Veeresh Kumar, R Pramod, C S P Rao, P S Shivakumar Gouda, “Artificial Neural Network Prediction on Wear of Al6061 alloy Metal Matrix Composites Reinforced with-Al2O3, Elsevier’s Materials Today: Proceedings, Volume 5, Issue 5, Part 2, 2018, Pages 11268-11276.
    • R Pramod, G B Veeresh Kumar, P S Shivakumar Gouda, Arun Tom Mathew, “A Study on the Al2O3 reinforced Al7075 Metal Matrix Composites Wear behavior using Artificial Neural Networks”, Elsevier’s Materials Today: Proceedings, Volume 5, Issue 5, Part 2, 2018, Pages 11376-11385.
    • B N Prashanth, R Pramod, G B Veeresh Kumar, “Design and Development of Hybrid Wind and Solar Energy System for Power Generation”, Elsevier’s Materials Today: Proceedings, Volume 5, Issue 5, Part 2, 2018, Pages 11415-11422.
    • P S Shivakumar Gouda, Srikanth K S, Rajesh Anwal, Rakeshshanthkumar N K, G B Veeresh Kumar, R Pramod “Thermal and Vibrational Characteristics of Single Point Cutting Tool on Aluminum and Wrought Carbon Grade B (WCB) Samples”, Elsevier’s Materials Today: Proceedings, Volume 5, Issue 5, Part 2, 2018, Pages 11423-11429.
    • G B Veeresh Kumar, R Pramod, C S P Rao, P S Shivakumar Gouda, “Artificial Neural Networks for the Prediction of Wear Properties of Al6061-TiO2 Composites”, IOP Conference Series: Materials Science and Engineering Journal, Volume 225, (2017) 011001 doi:10.1088/1757-899X/225/1/011001.
    • R Pramod, G B Veeresh Kumar, “Investigation of Mechanical Properties of Aluminium Reinforced Glass Fibre Polymer Composites”, AIP Conference Proceedings 1859, 020084 (2017); doi: 10.1063/1.4990237.
    • R Pramod, G B Veeresh Kumar, B N Prashanth, “Design and Fabrication of Metal Briquette Machine for Shop Floor”, AIP Conference Proceedings 1859, 020086 (2017).
    • R Pramod, G B Veeresh Kumar, P Sai Sri Harsha, K A Udaya Kumar, “Design and Development of Nautilus Whorl-Wind Turbine”, AIP Conference Proceedings 1859, 020093 (2017).
    • Ulhas K Annigeri, G.B. Veeresh Kumar,“Method of stir casting of Aluminium metal matrix Composites: A review” Elsevier’s Materials Today: Proceedings 4 (2017) 1140–1146.
    • Rakesh Kumar, Srinivas Rao Ratnala, Veeresh Kumar G B, P S Shivakumar Gouda, “Thermal Analysis on X-Ray Tube for Exhaust Process”, IOP Conference Series:  Materials Science and Engineering, Volume310 (2018) 012162. doi:10.1088/1757-899X/310/1/012162.
    • Umarfarooq M A, P S Shivakumar Gouda, Archana Nandibewoor, N R Banapurmath, Veeresh Kumar G B, “Determination of Residual Stresses in GFRP Composite Using Incremental Slitting Method by the Aid of Strain Gauge”, AIP Conference Proceedings 2057, 020038 (2019); https://doi.org/10.1063/1.5085609.   
  • Publications in International Conferences:
  1.   G B Veeresh Kumar, Krishna Knath V, Promod R, “Investigation on Mechanical Properties of Biodegradable Polymers”, International Conference on Materials, Mechanical& Energy Engineering (ICMMEE2021) 7th - 8th May 2021 Bapatla Engineering College. (To be published in IOP Conference Proceedings and is indexed in Scopus).
  2.  G B Veeresh Kumar, P Gowtham, P Sai Ram, V Sai Ganesh, P Sai Praneeth, “Fabrication and Tribological Behavior of Al3003-SiC Reinforced MMCs”, International Conference on Materials, Mechanical& Energy Engineering (ICMMEE2021) 7th - 8th May 2021 Bapatla Engineering College. (To be published in IOP Conference Proceedings and is indexed in Scopus).
  3.  G B Veeresh Kumar, P. Sai Ganesh, Atul Pandey, G. Surya Bharath, K. Vinay Kumar, “Studies on Stainless Steel 304 Samples Joined by Submerged Arc Welding, MIG Welding and Hybrid Welding” International Conference on Materials, Mechanical& Energy Engineering (ICMMEE2021) 7th - 8th May 2021 Bapatla Engineering College. (To be published in IOP Conference Proceedings and is indexed in Scopus).
  4.  G B Veeresh Kumar, Krishna Kanth V, Promod R, “Investigation of Structural Characteristics of Bamboo Laminates”, International Conference on Materials, Mechanical& Energy Engineering (ICMMEE2021) 7th - 8th May 2021 Bapatla Engineering College. (To be published in IOP Conference Proceedings and is indexed in Scopus).
  5.  G.B. Veeresh Kumar, C.S.P. Rao, N Selvaraj, “Prediction on Wear of Al6061-Al2O3 MMCs using Artificial Neural Networks”, International Conference Advances in Mechanical, Manufacturing and Building Sciences, School of Mechanical & Building Sciences, VIT University, Vellore 632 014, Tamil Nadu, India on January 9th to 11th 2012.
  6.  G.B. Veeresh Kumar, C.S.P. Rao, N Selvaraj, “Prediction on Wear Properties of Al7075-Al2O3 MMCs using Artificial Neural Networks” International conference on Simulation Modeling & Analysis (COSMA 2011) December 14th to 16th, 2011 Amrita Vishwa Vidyapeetham, Amrita School of Engineering, Coimbatore, Tamil Nadu, India.
  7.  G.B. Veeresh Kumar, A.R.K. Swamy, A. Ramesh, “Combined effect of T6 heat treatment and reinforcements on tribological properties in Al6061/WC /Gr metal matrix hybrid composites” Joint International Conference on Advanced Materials (ICAM 2011)” held between 19th to 20th Aug, 2011, B.T.L Institute of Technology, Bangalore, Karnataka, India.
  8.  G.B. Veeresh Kumar, A.R.K. Swamy, A. Ramesh, “Mechanical& Tribological Properties of Al6061-Tungsten Carbide-Graphite Hybrid Metal Matrix Composites” International Conference on “Recent Advances in Mechanical Engineering (INCRAME 2011)” held between 21st to 22nd April 2011, M.G.R. Educational and Research Institute University, Chennai, Tamil Nadu, India.
  9.  A.R.K. Swamy, A. Ramesha, J.N. Prakash, G.B. Veeresh Kumar, “Mechanical Property Evaluation of As-Cast Al6061-Tungsten Carbide Composites” International conference on Convergence of Science & Engineering in Education and Research, a Global Perspective in The New Millennium (ICSE2010), 21st to 23rd April 2010, at Dayananda Sagar College of Engineering, Bangalore-560078, Karnataka, India.
  10.  G.B Veeresh Kumar, C.S.P. Rao, Bhagyashekar M.S, Selvaraj N, “Wear Resistance Assessment of Al6061-SiC Metal Matrix Composites using Wear Endurance Index”, International Conference on Materials, Mechanics and Management (IMMM2010), held between 14th to 16th, January, 2010, College of Engineering Trivandrum, Tiruvananthapuram, Kerala, India.
  11.  G.B Veeresh Kumar, C.S.P. Rao, Bhagyashekar M.S, Selvaraj N, “Theoretical Prediction of Tribological Properties of Al6061-SiC Composites”, International Conference on Materials, Mechanics and Management (IMMM2010), held between 14th to 16th, January, 2010, College of Engineering Trivandrum, Tiruvananthapuram, Kerala, India.
  12.  Pradeep G R C, Ramesha A, G.B Veeresh Kumar “Studies on Mechanical Properties of Aluminum Alloy 6061-Al2O3 Composites”, International Conference on Materials, Mechanics and Management (IMMM2010), held between 14th to 16th, January, 2010, at College of Engineering Trivandrum, Tiruvananthapuram, Kerala, India.
  13.  G.B Veeresh Kumar, C.S.P. Rao, Bhagyashekar M.S, Selvaraj N, “Studies on Physical & Tribological Properties of Al6061-SiC Composites”, International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009) held between 19th to 21st Nov 2009, at Jnana Jyothi Auditorium, Bangalore University, Bangalore, India.
  14.  G.R.C. Pradeep, G.B. Veeresh Kumar, “Effect of Nitriding on Mechanical Properties of Graphite Reinforced Al6061 MMCs”, International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009) held between 19th to 21st Nov 2009, at Jnana Jyothi Auditorium, Bangalore, India.
  15.  A.R.K. Swamy, A. Ramesha, J.N. Prakash, G.B. Veeresh Kumar, “Mechanical Property Evaluation of As-Cast Al6061-Tungsten Carbide-Graphite Hybrid Composites”, International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009) held between 19th to 21st Nov 2009, at Jnana Jyothi Auditorium, Bangalore University, Bangalore, India.
  16.  G.B Veeresh Kumar, C.S.P. Rao, Bhagyashekar M.S, Selvaraj .N, “Mechanical and Tribological Behavior of Al6061-SiCp Composites”, International Conference on Recent Trends in Materials and Mechanical Engineering held during 18th to 20th Dec-2008, Dr. Mahalingam College of Engineering and Technology, Pollachi, TN, India.
  17.  G.B Veeresh Kumar, C.S.P. Rao, Bhagyashekar M.S, Selvaraj N, “Mechanical Properties of Particulate Reinforced (Al6061-Al2O3p and Al7075-SiCp) Composites”, International Conference on Micro Electro Mechanical Systems (MEMS - 08) held during 22nd – 23rd October 2008, Anjuman Engineering College, Bhatkal, Karnataka, India.

Publications in National Conferences:

  1. G. B. Veeresh Kumar, S. J. Likith, Sreejeet S. Nair, “Study of Physical, Mechanical and Tribological Properties of Al6061-Wc Metal Matrix Composite Manufactured by Powder Metallurgy Technique”, National Conference on Emerging Trends in Engineering Management (NCETEM-2014), 6th-7th November 2014.
  2. G.B. Veeresh Kumar, C.S.P. Rao, Selvaraj N, “Theoretical Prediction of Tribological Properties of Al6061-SiC Composites", National Conference on Advances in Mechanical Engineering (AIM Engg 2011)” held between 3rd to 5th January, 2011, Manipal Institute of Technology, Manipal – 576104, Karnataka, India.
  3. Srikanth Shekar, Meena, G.B. Veeresh Kumar, “Experimental Investigation of Properties of Al6061-SiC MMCs", National Conference on Advances in Mechanical Engineering (AIM Engg  2011)” held between 3rd to 5th January, 2011, Manipal Institute of Technology, Manipal – 576104, Karnataka, India.
  4.  Srikanth Shekar, Meena, G.B. Veeresh Kumar, “Experimental Investigation of Properties of Al6061-Al2O3 MMCs", National Conference on Advances in Mechanical Engineering (AIM Engg 2011) held between 3rd to 5th January, 2011, Manipal Institute of Technology, Manipal – 576104, Karnataka, India.
  5.  G.B. Veeresh Kumar, Murali Mohan, “Studies on Aluminum Alloy 7075-SiC Composites”, in the National Conference on Advances in Mechanical Engineering (AME – 09), 30th – 31st March 2009, Don Bosco Institute of Technology, Bangalore.
  6.  G.B. Veeresh Kumar, Govindaraju N, “Parametric Study of Wire Cut EDM Process by Taguchi’s Technique” National Conference on Trends and Innovations in Mechanical Engineering, TIME 2007. Held at Deccan College of Engineering and Technology, Hyderabad on 05th & 06th March 2007.
  7.  G.B. Veeresh Kumar, “Redesign of Rolling Mill” National Conference on Recent Advances in Design Engineering, RADE 2007.  Held at MANIPAL Institute of Technology, Manipal, Karnataka, India on 22nd to 24th February, 2007.
  8.  G B Veeresh Kumar, “Use of Robots in Sponge Iron Manufacturing” National Conference on Mechanical Engineering Trends, COMET 2006.  Held at Bellary Engineering College, Bellary, Karnataka, India on 19th & 20th May 2006.
  9.  G B Veeresh Kumar, B.S Kakol, K. Venkata Ramana, “Expert System for Sponge Iron ManufacturingNational Conference on Recent Advances in Mechanical Engineering, READ ME 2005.  Held at P.A. College of Engineering, Mangalore on 1st to 3rd Dec, 2005.

Books Published:

  1.  Veeresh Kumar Gonal Basavaraja, A R K Swamy, A Ramesh, titled as “Synthesis and Property Evaluation of Al6061 Gr WC Hybrid Composites”, LAP – LAMBERT Academic Publication (ISBN 978-620-0-24173-3)
  2.  Veeresh Kumar G B, C S P Rao, N Selvaraj, titled as “Prediction of Tribological Properties of Al MMCs using ANN Models”, LAP – LAMBERT Academic Publication (ISBN 978-3-659-57748-2).
  3.  Veeresh Kumar G B, C S P Rao, N Selvaraj, titled as “Tribological Studies on Aluminum-Based Particulate Reinforced MMCs”, LAP – LAMBERT Academic Publication (ISBN 978-620-0-25096-4).

 

 Expert/Guest Lecturer or Invited Talk:

  1.  G.B. Veeresh Kumar Delivered an Invited Talk on the topic "Make in India Strategy” on 22ne Sept 2020 in the Online FDP on "Cyber-physical production systems" 21-25 September 2020 sponsored by AICTE and organized by the Department of Mechanical Engineering, NIT Andhra Pradesh.
  2.  G.B. Veeresh Kumar Delivered an Invited Talk on the topic "Recent Developments in the Metal Matrix Composites" on 3rd March, 2017 in the TEQIP Sponsored Five days FDP on Advances in Nano-materials/Nano-composites for Engineering Applications, B V Bhoomaraddi College of Engineering and Technology (BVBCET), Hubballi - 31, Karnataka, INDIA held between Feb 27th to March 3rd 2017.
  3.  G.B. Veeresh Kumar Delivered an Invited Talk on the topic Applications and Innovations in Metal Matrix Composites”, International Workshop on Research and Applications of Advanced Composites and Materials (IWonRAACM-16) under TEQIP – 1.2, 07th to 08th December 2016, Sri Dharmasthala Manjunatheshwara College of Engineering and Technology (SDMCET), Dharwad – 580002, Karnataka INDIA.
  4.  G.B. Veeresh Kumar, invited talk titled “Graphene Reinforced Composite Materials – An Overview”, International Conference on Advanced Materials and Technology (ICMAT-16) under TEQIP - II, 26th to 28th May 2016, organized by the Department of Mechanical Engineering, Sri Jayachamarajendra College of Engineering, Mysuru – 570006, Karnataka INDIA.
  5.  G.B. Veeresh Kumar, invited talk titled “Research Methodology for Beginners”, International Conference on Mechanical Civil Electronics and Communications Engineering (ICMCECE 2016), 23rd April 2016, organized by the Department of Mechanical Engineering, Bangalore Technological Institute, Kodathi, Bangalore – 35, Karnataka INDIA.
  6.  G.B. Veeresh Kumar, invited talk titled “Advances in Metal Matrix Composites”, 4-day VTU-VGST sponsored “Faculty Development Program” 09th to 12th May 2014, Basavakalyan Engineering College, Basavakalyan, Bidar, Karnataka, India.
  7.  G.B. Veeresh Kumar, C.S.P. Rao, Bhagyashekar M.S, & Selvaraj N, invited talk titled “Behavior of Aluminum Metal Matrix Composites”, National Conference, Advances in Mechanical Engineering (AME – 09), 30th – 31st March 2009, Don Bosco Institute of Technology, Bangalore, India.

Conferences Organized:

  •  Organizing Chair – “International Conference on Advances in Materials and Manufacturing Applications – 2018” (IConAMMA - 2018) in association with IOP Conference Series: Materials Science and Engineering and Elsevier’s Materials Today: Proceedings, between August 16th to August 18th, 2018atDepartment of Mechanical Engineering, School of Engineering, Amrita Vishwa Vidyapeetham University, Bengaluru, Karnataka State, INDIA.
  •  Organizing Chair – “International Conference on Advances in Materials and Manufacturing Applications – 2017” (IConAMMA - 2017) in association with IOP Conference Series: Materials Science and Engineering and Elsevier’s Materials Today: Proceedings, between August 17th to August 19th, 2017atDepartment of Mechanical Engineering, Amrita Vishwa Vidyapeetham University, Bengaluru, Karnataka State, INDIA.
  •  Organizing Chair – “International Conference on Advances in Materials and Manufacturing Applications – 2016” (IConAMMA - 2016) in association with IOP Conference Series: Materials Science and Engineering between July 14th to July 16th, 2016 held at Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham University, Bengaluru, Karnataka State, INDIA. All accepted papers were published by IOP Conference Series: Materials Science and Engineering and are available on http://iopscience.iop.org/issue/1757-899X/149/1, papers were indexed through Scopus.

Workshops Organized or Coordinated:

  1.    Convener for One week Online FDP on "Cyber-physical production systems" (21-25 September 2020) sponsored by AICTE and organized by the Department of Mechanical Engineering, NIT Andhra Pradesh.

As Remote Center Coordinator for ISTE workshops by IIT-Bombay & IIT-K Project Ekalavya under NMEICT and MHRD Govt., of INDIA organized following workshops at Amrita School of Engineering – Bangalore campus remote center.

  1.      Two-week ISTE workshop on “Electric Power System”, 10th July 2017 to 15th July, 2017.
  2.      Two-week ISTE workshop on “CMOS, Mixed Signal and Radio Frequency VLSI Design”, 30th January - 4th February 2017.
  3.      Two Week ISTE workshop on STTP workshop on “Engineering Physics”, 08th to 18th December, 2015.
  4.      Two Week ISTE workshop on STTP workshop on “Technical Communication”, 08th October to 05th December, 2015 (both online and Offline workshop).
  5.      Two Week ISTE workshop on STTP workshop on “Environmental Studies”, 02nd June to 12th June, 2015.
  6.      Two Week ISTE workshop on “Introduction to Design of Algorithms”, 25th    May to 30th May, 2015.
  7.      Two Week ISTE main workshop on “Control Systems”, 02ndto 12th December 2014.
  8.      Two Week ISTE main workshop on “Cyber Security”, 10th to 20th July 2014.
  9.   Two Week ISTE main workshop on “Computer Networking”, 30th June to 05th July 2014.
  10.   Two Week ISTE main workshop on “Computer Programming”, 20th May to 21st June 2014.
  11.   10-days ISTE main workshop on “Fluid Mechanics”, 20th May to 30th May 2014.
  12.   10-days ISTE main workshop on “Signals & Systems”, 02ndto 12th January 2014.
  13.   10-days ISTE main workshop on “Engineering Mechanics”, 26th Nov to 06th Dec 2013.
  14.   10-days ISTE main workshop on “Analog Electronics”, 4th June to 14th June 2013.
  15.   10-days ISTE main workshop on “Database Management Systems”, 21st to 31st May 2013.
  16.   4-days ISTE main workshop on “Aakash Android Application Programming Workshop for Students”, 23/24 Feb 2013 and 2/3 March 2013.
  17.   10-days ISTE main workshop on “Engineering Thermodynamics”, from Dec 11th – Dec 21st, 2012.
  18.   2-days ISTE workshop on “Aakash for Education”, from Nov10th–Nov11th, 2012.
  19.   10-days ISTE workshop on “Introduction to Research Methodology”, from June 25th – July 04th, 2012.
  20.   10-days ISTE workshop on “Computational Fluid Dynamics”, from June 12-22, 2012.
  21.   2-days ISTE workshop on “Writing Effective Conference Papers”, Feb 18-19, 2012.
  22.   10-days ISTE workshop on “Solar Photovoltaics”, from Dec 12th - Dec 22nd, 2011.
  23.   10-days ISTE workshop on “Basic Electronics”, from June 28th - July 08th 2011.