Placeholder image


Dr. SUBHAJIT SEN

ABOUT
NAME: Dr. SUBHAJIT SEN

M.TECH: IIT Roorkee

E- MAIL: subhajitsen@nitandhra.ac.in

POSITION: Assistant Professor

PhD: IIT Kharagpur

PHONE: +91 9732899189


AREAS OF INTEREST: Computational Mechanics, Impact Dynamics, Fluid-Structure Interaction, Performance-Based Design, Earthquake Engineering

PROFILE

PROFESSIONAL EXPERIENCES

     Teaching Experience

  •  Assistant Professor, National Institute of Technology Andhra Pradesh, Department of Civil Engineering, 30th December 2024 – Till date.
  •  Assistant Professor, Birla Institute of Technology, Mesra, Department of Civil and Environmental Engineering, 27th September 2021 – 24th December 2024.

      Research Experience

  •  C V Raman Postdoctoral Fellow, Indian Institute of Science Bangalore, Department of Mechanical Engineering, 11th September 2020 – 10th September 2021
  •  Senior Project Officer, Indian Institute of Technology Kharagpur, Department of Civil Engineering, 22nd July 2019 – 21st July 2020

        Industrial Experience

  •  Development Consultants Private Limited, Kolkata, India, Design Apprentice, 22nd July 2011 – 30th June 2012

 

AWARDS/ACHIEVEMENTS

  • CV Raman Post-Doctoral Fellowship 2020-2021, IISc Bangalore
  • The Indian Service of Engineers Award 2014, IIT Roorkee
  • Laxmi Devi and Shri Bhandari Das Prize 2014, IIT Roorkee
  • Dr. Jai Krishna Medal 2014, IIT Roorke.


THEORY COURSES TAUGHT

UG Level

  • Structural Analysis – I (BIT Mesra)
  • Structural Analysis – II (BIT Mesra)
  • Solid Mechanics (BIT Mesra)
  • Strength of Materials – I (NIT Andhra Pradesh)

 PG Level

  • Structural Dynamics (BIT Mesra)
  • Earthquake Engineering (BIT Mesra)
  • Finite Element Method (BIT Mesra)

 

SPONSORED PROJECT

  • “Impact response of bio-inspired fibre-based helicoidal composites”, Science and Engineering Research Board (SERB), Start-up Research Grand (SRG), Subhajit Sen (PI), 32.67 lakhs, 2 years (completed)

 

RESEARCH PUBLICATIONS

Journals

  1. Sen, S., Shaw, A. and Nayak, S. (2022) “A mathematical model for perforation of metal plates through adiabatic shear plugging”,  International Journal of Impact Engineering, 163, pp. 104175. doi: 10.1016/j.ijimpeng.2022.104175
  2. Sen, S. Shaw, A. and Adhikari, B. (2022) “On the possibility of using Ramie – A natural material in cost effective low threat body armours”, Journal of Industrial Textiles,51(4S), pp.6612S-6639S. doi:  10.1177/15280837221076576
  3. Sen, S. Banerjee, B. and Shaw, A. (2020) “Taylor impact test revisited: Determination of plasticity parameters for metals at high strain rate”, International Journal of Solids and Structures, 193-194, pp.357-374. doi: 10.1016/j.ijsolstr.2020.02.020
  4. Sen, S. Jamal, NBM. Shaw, A. and Deb, A. (2019) “Numerical investigation of ballistic performance of shear thickening fluid (STF)-Kevlar composite”, International Journal of Mechanical Sciences, 164, pp.105174. doi: 10.1016/j.ijmecsci.2019.105174
  5. Sen, S. and Shaw, A. (2018) “A generalized model for dynamic deformation and failure of clamped beam under impact loading”. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 474(2215), pp.20170799.  doi: 10.1098/rspa.2017.0799
  6. Sen, S. and Singh, Y. (2016) “Displacement-based seismic design of flat slab-shear wall buildings”. Earthquake Engineering and Engineering Vibration, 15, pp.209-221.doi: 10.1007/s11803-016-0317-1

Book Chapters

  1. Sen, S. and Shaw, A. (2019). “Analytical model for failure of clamped beam subjected to projectile impact”. In: Rao, A. and Ramanjaneyulu, K. (Eds) Recent Advances in Structural Engineering, Volume 2 (pp. 161-172). Springer, Singapore. doi: 10.1007/978-981-13-0365-4_14
  2. Sen, S. and Singh, Y. (2015) “Seismic performance of flat slab buildings”. In: Matsagar, V. (Eds) Advances in Structural Engineering (pp. 897-907). Springer, New Delhi. doi: 10.1007/978-81-322-2193-7_70

Conferences

  1. Sen, S., Banerjee, B. and Shaw, A. (2017) “Parameter estimation of metal plasticity from time history data of Taylor impact test”. 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST 2016), Dec. 11-14, 2016, New Delhi, India. In: Procedia Engineering, 173, pp.663-670. doi: 10.1016/j.proeng.2016.12.138
  2. V. Kumar, H. Mahto, S. Sen, Dynamic response of fibre-based helicoidal composites under high strain rate loading. 14th Structural Engineering Convection (SEC-2024), Dec. 12-14, 2024, NIT Tiruchirappalli, India.
  3. Singh, I.V., Anish, Sen, S., Predictive Modelling of Compressive Strength in Self-Compacting Concrete Incorporating Recycled Concrete Aggregate. 14th Structural Engineering Convection (SEC-2024), Dec. 12-14, 2024, NIT Tiruchirappalli, India.
  4. Singh, I.V., Anish, Sen, S., Review-study on physical properties of SCC having quarry dust, recycled concrete aggregate, and sugarcane bagasse ash. 13th Structural Engineering Convection (SEC-2023), Dec 07-09, 2023, VNIT Nagpur, India.
  5. Sen, S., and Shaw, A. “Development of Ramie fibre based bullet-proof vest”, International Conference on Advanced Materials and Processes for Defence Applications (ADMAT-2019), Sep. 23-25, 2019, Hyderabad, India