Placeholder image


Dr. SANTHOSH KUMAR GUGULOTHU

ABOUT
NAME: Dr. SANTHOSH KUMAR GUGULOTHU

M.TECH: Indian Institute of Technology Madras

E- MAIL: santoshgk1988@nitandhra.ac.in

POSITION: Assistant Professor

PhD: JNTU Hyderabad

PHONE: +91 9666555871


AREAS OF INTEREST: Combustion and Emission Diagnostics; Battery Thermal Management Systems; Phase Change Materials and Nanotechnology; Renewable Energy Systems; Computational Fluid Dynamics (CFD) and Optimization

EXTERNAL LINK: https://scholar.google.com/citations?user=KApK6XgAAAAJ&hl=en
BRIEF

Education:                      

Ph.D. (2018) in Mechanical Engineering (Thermal Engineering)             :  Jawaharlal Nehru Technological University  Hyderabad.

M.Tech. (2011) in Mechanical Engineering (Thermal Engineering)         :  Indian Institute of Technology Madras.

B.Tech. (2009) in Mechanical Engineering                                                              : University College of Engineering; JNTU Anantapur.

Thesis Title:

Ph.D.:       Simulation Studies of the Effect of Piston Bowl Geometry on In-Cylinder Fluid Flow in a DI Diesel Engine with Different Fuel Injection Strategies  

M.Tech.:     Numerical Studies of cavitating flow past axisymmetric bodies

Teaching Experience: 

  •  Assistant Professor (Gr.I) (15.09.2024 to Till date), Mechanical Engineering Department, National Institute of Technology  Andhra Pradesh

  • Assistant Professor (Gr.II) (07.11.2019 to 15.09.2024), Mechanical Engineering Department, National Institute of Technology  Andhra Pradesh

  •  Assistant Professor (10.12.2018 to 06.11.2019), Mechanical Engineering Department, National Institute of Technology  Hamirpur.

  •  Professor (29.06.2018 to 26.11.2018), Mechanical Engineering Department, MLR Institute of Technology Hyderabad.

  •  Assistant Professor (Gr.I, AGP: 8000) (03.06.2013 to 30-06-2018), Mechanical Engineering Department, GITAM University-Hyd. Campus.

  • Assistant Professor (Gr.I, AGP: 8000) (17.04.2011 to 02.06.2013), Mechanical Engineering Department, ICFAI Foundation for Higher Education Hyderabad. 

    Research Project:

 

S. No.

Title of the Research Project

Role

Funding Agency

Grant Amount (INR)

Status

1

Evaluation of Autonomous Underwater Vehicle (AUV) Behaviour in Waves

Co-PI

NSTL–DRDO

11,20,000

Ongoing

2

Performance Analysis of Ventilation Supercavitating Torpedo Considering Mass Transfer Mechanisms and Dynamic Studies on its Structure

PI

NSTL–DRDO

48,25,000

Ongoing

3

Thermal Optimization of Nanoparticle-Enhanced Phase Change Materials with Honeycomb Extended Surfaces for Accelerated Latent Heat Storage

PI

NIT Andhra Pradesh (Institute Sponsored)

6,00,000

Completed

4

Magneto-Hydrodynamic Convective Heat and Mass Transfer in a Fluid

Co-PI

RUSA 2.0 – MHRD, Government of India

11,10,000

Ongoing

5

Advancing Sodium-Ion Battery Technologies through Materials Innovation, PCM-Based Thermal Management Integration, and AI-Driven Analytics (ANRF/PAIR/2025/000007)

Co-PI

ANRF–PAIR

2,00,00,000

Ongoing

 

Ph.D. Thesis Awarded:

  •  

    S.No.

    Name of the Scholar

    Title of the Thesis

    Year of Completion

     1.

    J. Ramachander (PF071952)

    Exploration over Combined Impacts of Alcohol Blends on Low and High Viscous Biofuels on CRDI Diesel Engine Performance, Emission

    and Combustion Characteristics.

    2023

     2.

    S. Krishna Kireeti (PF071951)

    Numerical Investigation on the Influence of Hydrogen Injection Strategies on the performance and Combustion Characteristics of Dual cavity-based Scramjet Combustor

    2023

     3.

    P. Narasimha Siva Teja (PF072001)

    Effect of Nano-Particles and Nano-enhanced Phase Change Materials on Heat Transfer Enhancement of Thermal Energy Storage Systems

    2023

     4.

    N Prabhu Kishore (PP071951)

    Optimization of Engine Characteristics to Reduce Nitric Oxide Emissions of a CRDI Diesel Engine Fuelled with Different Metal-based Nano Additives Blended with Mahua Methyl Ester Oil

    2024

     5.

    Athmakuri Ashok (PP071957)

    Experimental Investigation on Aerodynamic Characteristics of Combined Effect of Oxygenated Additives, Injection Pressure, and Timing on the Characteristics of RCCI Engine: A Modelling and Optimization Approach with Box-Behnken Response Surface Methodology

    2024

     6.

    Srikanth Vadlamudi (PP072007)

    An Ideal Investigation on Conventional CRDI Engine for Optimum Paradigm Analysis of Performance and Exhaust Emissions by Using Oxygenated and Hydrogen Fuel: An Experimental Green Dual Fuel Approach

    2024

    7.

    Navya Sree Seelam

    Effect of Piston bowl geometry on In-cylinder combustion and engine performance characteristics on a diesel-hydrogen engine under different fuel injection strategies 

    2024

    8.

    Naresh Kumar Goud Ranga

    Hybrid Design of Nano Material - Enhanced Composite PCMs and Advanced Fins for Efficient Thermal Energy Storage: A Numerical Perspective

    2026

    9.

    Madduri Raj Kumar Reddy

    Characterization, Machinability Optimization, and Machine Learning-Driven Analysis of Al–Cu–SiC–GNP Hybrid Composites Fabricated via Stir Casting and Wire-Arc Additive Manufacturing

    2026

    10.

    Shaik Shahjahan

    Design and Evaluation of cavity flame holders for enhanced flame stabilisation in supersonic combustion

    2026

    11.

    S MD Shehabaz

    Multi-Numerical and Experimental Investigations on Hybrid PCM–Fin–Heat-Pipe & Duct Based Thermal Management Systems for High Power Lithium-ion Battery Packs: Advanced Design Optimization & Performance Enhancement Strategies

    2026

        

    Ongoing PhD

    Rahul  Gaikwad ( Course work Completed)

     

    Revula Dinesh ( Course work Completed)

     

Academic courses taught: 

  •          Thermodynamics

  •          Fluid Mechanics

  •          Heat transfer

  •          Refrigeration and Air Conditioning

  •          Heat Transfer

  •          Automobile Engineering

  •          Computational Fluid Dynamics

  •          Modeling and Simulation.

Additional Responsibilities:

Institute Level:

Associate Dean, MoU (July 2026 to Till date)

Associate Dean, SCAIR  (July 2022 to December 2024)

Associate Dean, Student Welfare  (January 2022 to June 2022)

NBA & NIRF Coordinator, DMEC  (October 2020 to December 2024)

Department Level:

Head of the Department of Mechanical Engineering (December 2024 to till date)

Faculty Coordinator:

                1. M.Tech. Thermal Engineering (July 2020 to Till date)

 Faculty In charge:

                1. Heat and Mass Transfer Laboratory (January 2021)           

Member: Departmental Academic Committee – PG & Research (from Jan. 2019)

Member: Departmental Academic Committee – UG (from Jan. 2019)

Member: Board of Studies – UG (from Jan. 2019)

Member: Board of Studies – PG (from Jan. 2019)

List of Patents:

1. G. Ravi Kiran Sastry; Jibitesh Kumar Panda;  Santhosh Kumar Gugulothu "A System and A Method for Analyzing Performance and Emission on DI Diesel Engine Fueled with Diesel-Palm Kernel Methyl EsterTriacetin Blends", Application ID: 2021102418 

2. Santhosh Kumar G et al.  " A Common Rail Direct Injection Diesel Engine Operable on Multiple Non-Fossil Fuels," Application ID: 202441089235.

3. Dr. Santhosh Kumar Gugulothu, "A Common Rail Direct Injection (CRDI) Diesel Engine Operable on Multiple Non-Fossil Fuels", Application ID: 202441089235 (Filed on: 18-Nov-2024; Published on: 29-Nov-2024; Status: Awaiting Examination).

4. Dr. Santhosh Kumar Gugulothu, "Smart Liquid Dispenser with Adjustable Measurement", Application ID: 202521013651 (Filed on: 18-Feb-2025; Status: Filed – Receipt Confirmed).

5. Dr. Santhosh Kumar Gugulothu, "Mechanical Auto-Flush System for Water Conservation in Urinals", Application ID: 202541017217 (Filed on: 27-Feb-2025; Status: Filed – Receipt Confirmed).

 

Faculty Development Programs Organized

  • A Five-day Online FDP on "Condition Monitoring and Hydrodynamic Design of Marine Vehicles" (Application number: 1649401240) at NIT Andhra Pradesh from 09/11/2022 to 27/11/2022 sponsored by AICTE Training and Learning (ATAL) Academy.

  • Organized a week-long Online Faculty Development Program on “Advances in Engine Combustion and Emission Diagnostics” held from 05.10.2020 to 09.10.2020 at the National Institute of Technology, Andhra Pradesh.

  • Organized a week Online Faculty Development Program on “Recent Advances in Renewable Energy Technologies for Sustainable Development” held from 25/09/2020 to 29/09/2020 at the National Institute of Technology, Andhra Pradesh.

  • Organized a Two-Week ISTE workshop on “Fluid Mechanics” conducted by IIT Kharagpur from May 20 to 30 May 2014.

 

Research Contributions and Expertise

Dr. Santhosh Kumar Gugulothu is an accomplished academician and researcher with over 15 years of teaching and research experience, specializing in Thermal Engineering, Computational Fluid Dynamics (CFD), Advanced Energy Systems, and Sustainable Engineering Technologies. His extensive research portfolio comprises more than 100 publications in SCI/SCIE and Scopus-indexed journals, including 35 Q1 and 30 Q2 journal publications. His principal research interests encompass advanced battery thermal management systems, nano-enhanced phase change materials, latent heat thermal energy storage, hydrogen-fuelled scramjet propulsion, supersonic combustion, marine hydrodynamics, multiphase flows, renewable energy systems, and sustainable combustion technologies. His research integrates experimental investigations, high-fidelity multiphysics simulations, artificial intelligence, machine learning, and multi-objective optimization to address contemporary engineering challenges in energy, aerospace, transportation, and industrial applications.

Dr. Gugulothu has demonstrated significant research leadership through sponsored research projects supported by DRDO–NSTL, the Anusandhan National Research Foundation (ANRF), RUSA, and other institutional funding initiatives, with a combined project portfolio exceeding Rs. 2.76 crore as Principal Investigator and Co-Principal Investigator. His academic contributions extend to doctoral and postgraduate research supervision, patent applications, industrial consultancy, and multidisciplinary research collaborations. His ongoing research emphasizes next-generation lithium-ion and sodium-ion battery technologies, intelligent thermal management, hydrogen-based clean energy systems, advanced heat transfer enhancement, and data-driven engineering optimization. Through the integration of fundamental scientific principles with technological innovation, he is committed to advancing energy efficiency, environmental sustainability, high-performance engineering systems, and research-driven solutions of national and international relevance.

Awards, Honours and Professional Recognition

  • World’s Top 2% Scientists (2024, 2025 and 2026): Recognized among the world’s top 2% scientists in the field of Energy for three consecutive years in the Stanford–Elsevier global scientist rankings, reflecting sustained research excellence, scholarly impact, and scientific contributions.

  • Young Engineer Award – 2025: Conferred by Lions Clubs International in recognition of outstanding contributions to engineering research, technological innovation, and professional excellence.

  • Young Scientist Award – 2025: Received at Nanyang Technological University (NTU), Singapore, in recognition of significant research contributions to advanced thermal engineering and energy systems.

  • Young Scientist Award – 2026: Conferred at the ACMS Conference 2026, organized by the Indian Institute of Chemical Engineers (IIChE), in recognition of excellence in interdisciplinary engineering research and scientific innovation.

  • M. S. Swaminathan Green Excellence Award – 2025: Honoured under the prestigious Green Innovation category at the International Conference on Green Technology, Policy and Finance (ICGTPF 4.0). The award was presented by the Hon’ble Governor of Telangana in recognition of significant contributions to sustainable engineering, green technologies, and environmental innovation.

  • Rashtriya Gaurav Award – 2018: Selected for this award in recognition of academic excellence, professional achievements, and contributions to society.

  • Outstanding Academic Achievement – GATE: Secured All India Rank (AIR) 37 with a percentile score of 99.81 in the Graduate Aptitude Test in Engineering (GATE), demonstrating exceptional academic proficiency in engineering.

  • Advisory Member – Examination Reforms: Serving as an Advisory Member in examination reform activities associated with the Union Public Service Commission (UPSC) since 2018.

     

Memberships in Professional Bodies

International Professional Memberships

  • American Society of Mechanical Engineers (ASME), USA – Member (Membership No.: 000103643393).

  • International Association of Engineers (IAENG) – Member (Membership No.: 270649).

  • Hong Kong Society of Mechanical Engineers (HKSME) – Member (Membership No.: M20201110001).

  • Universal Association of Mechanical and Aeronautical Engineers (UAMAE) – Member.

National Professional Memberships

  • Indian National Academy of Engineering (INAE) – Senior Member (Membership No.: INAE/IndM/178).

  • The Institution of Engineers (India) [IEI] – Corporate Member (Membership No.: M-1830325).

  • Consulting Engineers Association of India (CEAI) – Individual Member (Membership No.: M-966).

  • Indian Society for Technical Education (ISTE) – Life Member (Membership No.: 143627).

  • National Society of Fluid Mechanics and Fluid Power (NSFMFP) – Life Member, associated with research and professional activities in fluid mechanics, fluid power, and allied engineering disciplines.

Outreach Activities / Invited Lectures / Keynote Addresses

  1. Invited Speaker – Six-day Faculty Development Programme on “Green Hydrogen and Advanced Flexi-Fuel Technologies for Future Mobility,” Sasi Institute of Technology & Engineering, Tadepalligudem, 25–30 May 2026.

  2. Invited Guest Faculty – Training Programme for newly recruited Assistant Motor Vehicle Inspectors (AMVIs), sponsored by the Transport Department, Government of Telangana, organized by ESCI, Hyderabad, 14–15 July 2025. Topics: AI in Automobile Engineering, Electric Vehicles, Autonomous Vehicles, Alternative Fuels and Advanced Automotive Technologies (six sessions).

  3. Invited Guest Faculty – Induction Training Programme for Group ‘A’ Officers of Military Engineer Services (MES), Batch–07, ESCI, Hyderabad, 2 January 2025. Topic: Thermodynamics, Refrigeration and Air Conditioning.

  4. Keynote Speaker – 6th Congress on Advances in Mechanical Sciences (ICAMS–2024), Vardhaman College of Engineering, Hyderabad, 26–27 July 2024.

  5. Invited Guest Faculty – MoRTH-sponsored Training Programme on “Recent Developments in Transportation Sectors and Mobility,” organized by ESCI at Gangtok, Sikkim, 27–28 February 2024. Topics: Robotic Process Automation, Automatic Vehicle Location Systems, Real-Time Passenger Information Systems and Artificial Intelligence.

  6. Invited Guest Faculty – MoRTH-sponsored Training Programme on “Clean Technologies, Including Alternative Fuels and EVs,” ESCI, Hyderabad, 14 February 2024. Topic: Vehicle Technologies and Safety Issues.

  7. Invited Guest Faculty – Induction Training Programme for Group ‘A’ Officers of Military Engineer Services (MES), Batch–05, ESCI, Hyderabad, 28 June 2023. Topic: Refrigeration and Air Conditioning.

  8. Invited Guest Faculty – Induction Training Programme for Group ‘A’ Officers of Military Engineer Services (MES), Batch–04, ESCI, Hyderabad, 14 September 2022. Topic: Refrigeration and Air Conditioning.

  9. Invited Guest Speaker – Workshop on “Recent Trends in Electric Vehicles: Opportunities and Challenges,” D.N.R. College of Engineering & Technology, Bhimavaram, 5 January 2022. Topic: Electric Vehicle Thermal Management Systems.